Windows / Not specified in filename
SovolSlicer_Windows_Installer_V2.3.0.4.exe
Stable2.3.0.4
Official files
Choose your download.
Stable · Sep 8, 2025
1 downloadable file for this selection.
Platform and processor labels come from the published filenames. Unspecified processors are shown as unspecified; check the official release before choosing.
Latest changes
- releases
- 4
- stable
- 4
- previews
- 0
- with notes
- 4
- official files
- 4
Excerpts are taken from the linked official release notes and can remain in the publisher’s original language.
- Stable
- Stable
Sovol OrcaSlicer 2.3.0.2
2.1: Bridge traffic changed to 1 2.2: Change the internal bridge traffic ratio to 1 2.3: Close the internal/external bridge and use thick bridges
Read full release notes → - Stable
- Stable
Updating to the latest release
Preserve before install
Keep the installer or profile archive and export current SV08 or SV08 MAX presets before replacing them.
Open official preservation source ↗First validation after update
Confirm the selected model and G-code parameters; inspect bed heating before START_PRINT and first-layer homing behaviour.
Open official validation source ↗
Good to know
Sovol OrcaSlicer is Sovol’s vendor repository for an OrcaSlicer build and regularly updated Sovol and Comgrow printer configurations.
Sources reviewed:Where it fits
Its value is the vendor-tuned configuration layer: current releases can change start G-code, nozzle profiles and process defaults for specific Sovol machines.
Install and update note
Read the release scope before installing. Version 2.3.0.4 is explicitly for SV08 and SV08 MAX and ships a Windows installer plus a separate profile archive. A profile ZIP supplies settings; it is not the slicer installer.
Menus, folders and commands
Profiles and transfer
- Where
- Release assets → application installer / profile archive
- Contains
- Windows application installer
- Sovol profile ZIP
- Check
- The profile archive configures supported machines; it does not install the slicer
Confirm whether the action affects one preset, a project or the entire configuration set.
Open official instructions ↗Printer definition
- Where
- Sovol OrcaSlicer 2.3.0.4 → SV08 / SV08 MAX profiles
- Contains
- SV08 · supported profile
- SV08 MAX
- Check
- Official notes require G-code parameters to match the actual machine
Treat these values as printer-, nozzle- and material-specific.
Open official instructions ↗Settings scope
- Where
- Bed heating → START_PRINT → homing / first layer
- Contains
- Bed heat before START_PRINT
- Reduced secondary-homing effect on first-layer height
- Check
- Sequence change targets power load and first-layer behaviour on the supported profiles
Treat these values as printer-, nozzle- and material-specific.
Open official instructions ↗
Common questions
Why does Sovol maintain its own OrcaSlicer repository?
Sovol says it uses the repository to update Sovol and Comgrow configurations and to synchronize newer OrcaSlicer software.
Check the source ↗Which printers is release 2.3.0.4 for?
The official notes limit it to SV08 and SV08 MAX and tell users to verify that G-code parameters match the machine.
Check the source ↗Does the profile ZIP install the slicer?
No. The release publishes the Windows application installer and the profile archive as separate assets.
Check the source ↗Why did the SV08 start sequence change?
The release heats the bed before START_PRINT to avoid power overload and also reduces the effect of secondary homing on first-layer height.
Check the source ↗Full release history
4 releases in the GitHub release archive
Release history in numbers
- Observed archive span
- Years represented
- 1
- Median release interval
- 76.1 days
- Busiest release year
- 4 releases in that year
Downloads by platform and format
4 public application files
Counts cover attached application packages across all indexed releases. The same package type may recur in several versions; platform and format are classified from the publisher filename.
Files by platform
- Windows4
Files by format
- EXE4
Sovol and Comgrow profiles
Choose the profile for your exact printer and nozzle. The publisher’s profile ZIP files are separate from the Windows installer; they do not install the slicer.
Project documentation ↗A project file is not an installer
A .3mf file holds model or project data. Opening it does not install the slicer. After opening a project, check the printer, nozzle and material settings.
Check the official requirements
Files are hosted by the developers. Before installing, check their system requirements and release notes. A file labelled for your platform does not establish the minimum OS version.
Before you update →