Sovol OrcaSlicer

Sovol OrcaSlicer 2.3.0.4

Official release record for Sovol OrcaSlicer 2.3.0.4, published Sep 8, 2025.

Stable1 public packages6,270 recorded GitHub downloads

Official files in this release

Windows · 1 files

SovolSlicer_Windows_Installer_V2.3.0.4.exeNot specified in filename · 129.2 MiB · 6,270 downloads
✓ SHA-256 available
Verify this file
Expected SHA-2567b71ff161da6515251adb8db59dd7df0ac0e2165628be252509e863b3058ea29
Local verification commands
Windows PowerShellGet-FileHash -Algorithm SHA256 -LiteralPath '.\SovolSlicer_Windows_Installer_V2.3.0.4.exe'
macOS Terminalshasum -a 256 -- 'SovolSlicer_Windows_Installer_V2.3.0.4.exe'
Linux terminalsha256sum -- 'SovolSlicer_Windows_Installer_V2.3.0.4.exe'
The digest is supplied by GitHub for the publisher’s release asset. A matching local result shows that the downloaded bytes match that asset.
SHA-256 verifier →
Official download ↗

Package changes from the previous release

Compared with 2.3.0.2, all classified package counts remain unchanged at 1 public files.

Counts are separate views of publisher filenames by platform, processor and format. They are not compatibility or support guarantees.

Release-note preview

A plain-text excerpt from the publisher’s release notes. Open the official release for the complete and current text.

Publisher notes are shown in their original source language. This excerpt is not machine-translated.

SV08 & SV08 MAX Release Notes

Applicable Models: SV08 / SV08 MAX

🔧 Update Overview

1. Model Configuration Optimization

Removed SV08PRO-related parameter configurations to focus on SV08 and SV08 MAX models.

2. SV08 Print Start Process Optimization

Reduced impact of secondary homing on first-layer printing — Improved homing algorithm to minimize interference with first-layer printing height and increase success rate.
Resolved overvoltage issue caused by startup sequence — Adjusted the heating sequence: heat the bed first, then execute the START_PRINT command to prevent power overload.

3. SV08 MAX Print Logic Fix

Fixed unresponsiveness after initiating print to ensure immediate task execution.

4. System Process Simplification

Disabled plugin installation to simplify the initialization process and improve system stability and startup speed.

5. UI Interaction Improvements

Fixed the top-layer display issue for Sovol machines to enhance user experience.

⚠️ Notes

This update applies only to SV08 and SV08 MAX models.
If printing abnormalities occur, check whether the G-Code parameters match the printer model.

SV08 & SV08 MAX 更新说明

适用机型： SV08 / SV08 MAX

🔧 更新内容概览

1. 机型配置优化

移除 SV08PRO 相关参数配置，专注 SV08 和 SV08 MAX 机型支持。

2. SV08 打印启动流程优化

优化二次归零对首层打印的影响 — 调整归零算法，减少对首层打印高度的干扰，提升打印成功率。
解决启动顺序导致的过压问题 — 将加热流程调整为先升温热床，后执行 START_PRINT 指令，避免电源过载。

3. SV08 MAX 打印逻辑修复

修复开始打印后无动作响应的问题，确保打印任务立即执行。

4. 系统流程简化

关闭插件安装功能，简化初始化流程，提升系统稳定性和启动速度。

5. 界面交互优化

修复 Sovol 机器置顶显示问题，提升用户操作体验。

⚠️ 注意事项

本次更新仅适用于 SV08 和 SV08 MAX 机型。
如遇打印异常，请检查 G-Code 参数是否与机型匹配。

Official release ↗