SuperSlicer

SuperSlicer 2.3.56.0

Official release record for SuperSlicer 2.3.56.0, published May 22, 2021.

Pre-release4 public packages1,155 recorded GitHub downloads

Official files in this release

SuperSlicer-ubuntu_18.04-2.2.56.0.AppImageNot specified in filename · 70.0 MiB · 117 downloads
Official download ↗
SuperSlicer_2.3.56.0_linux64_20210522.tar.zipNot specified in filename · 68.2 MiB · 49 downloads
Official download ↗

SuperSlicer_2.2.56.0_macos_20210522.dmgNot specified in filename · 46.1 MiB · 166 downloads
Official download ↗

SuperSlicer_2.2.56.0_win64_20210522.zipIntel / AMD 64-bit · 55.2 MiB · 823 downloads
Official download ↗

Compared with 2.3.55.5, all classified package counts remain unchanged at 4 public files.

Counts are separate views of publisher filenames by platform, processor and format. They are not compatibility or support guarantees.

A plain-text excerpt from the publisher’s release notes. Open the official release for the complete and current text.

Publisher notes are shown in their original source language. This excerpt is not machine-translated.

This branch may turn into the stable one. I just want to iron out the last bugs with a beta before.

There is still some problems on the code generation (mainly for multi-extruders printers), but these will be taken care on the next version.

windows: delete the opengl32.dll to get back normal performance.
windows: translations are borked (unless you use the uft-8 mode)
I again made an error when naming the zip > anchorlengthmax error
fix macos icns #1086
Fix for auto-heating when using one extruder from many #1103
#1083 Make deselectable the automatic switch from tabs during background processing
#1076 adjust color changes for z_offset
#1073 fix Infill doesn´t switch to Rectilinear at 100%
no infill: allow margins and denser infill
fix crash on slice if no extruder names
fix error when no settings directory
Implement more tests. Thanks to Joseph Lenox
#922 Infill bridge issues
#944 Spiral vase mode should now turn off some of SuperSlicer's new settings
#979 Thumbnail sizes gui bug
#988 don't use the cost-based field in other seam algo.
#1005 Draft shield if complete objects
#1007 fix temperature calibration
#1016 Multimaterial Toolchange Temperature can now be set to a value below 175°C
#1002 ironing post-process angle
#995 thin wall bug (boost voronoi bug) mitigation

note: I haven't tested the linux & macos build. You can have daily builds in the action menu of github. You can support me with the "sponsor" button