QIDI Slicer
QIDI Slicer V1.1.2
Official release record for QIDI Slicer V1.1.2, published Mar 19, 2024.
Official files in this release
Linux · 1 files
- QIDISlicer_1.1.2_Linux.AppImageNot specified in filename · 109.6 MiB · 568 downloadsOfficial download ↗
macOS · 3 files
- QIDISlicer_1.1.2_MacOS_arm64.dmgARM64 · 107.0 MiB · 645 downloadsOfficial download ↗
- QIDISlicer_1.1.2_MacOS_x86.dmg32-bit · 110.2 MiB · 597 downloadsOfficial download ↗
- QIDISlicer_1.1.2_MacOS_x86_10.13.dmg32-bit · 110.7 MiB · 194 downloadsOfficial download ↗
Windows · 2 files
- QIDISlicer_1.1.2_Win64.zipIntel / AMD 64-bit · 102.3 MiB · 1,845 downloadsOfficial download ↗
- QIDISlicer_Setup_1.1.2_Win64.exeIntel / AMD 64-bit · 103.6 MiB · 7,809 downloadsOfficial download ↗
Package changes from the previous release
Compared with V1.1.1, the number of public application files changes from 5 to 6.
Platform
- macOS2 → 3Added +1
Architecture
- 32-bit1 → 2Added +1
Format
- DMG2 → 3Added +1
Counts are separate views of publisher filenames by platform, processor and format. They are not compatibility or support guarantees.
Release-note preview
A plain-text excerpt from the publisher’s release notes. Open the official release for the complete and current text.
Publisher notes are shown in their original source language. This excerpt is not machine-translated.
QIDISlicer logo
In this version we added a new 3D printer —— Q1 Pro. Learn more ↗.
New
- Add a new 3D printer —— Q1 Pro.
New technology, new products, bring you a new printing experience. 1
- Bed exclude area.
Now you can set up two rectangular non-printable areas on the print platform. 2
- Filament shrink.
You can set the scale of the model according to the shrinkage rate of the filament for more accurate printing(thanks to OrcaSlicer). 3
- Gap fill.
Fill in the gaps in the top surfaces of the model to get a better top. And you can set minimum fill thresholds. 4 5
- PLA-CF.
A new filament, PLA-CF, was added. 6
Improvements
- The wall overlap algorithm is optimized to reduce the convex points on the surface of the model.
- In the physical printer interface, support for normal Klipper printers has been added.
- Optimized configuration update notification.
- Add the Max Volumetric Speed usage instructions in the guide，and shrink the model when the printing platform is small.
- When running for the first time, select the common printer configuration.
- Optimized solid infill algorithm for narrow areas and classical walls.
- Improved compatibility with MacOS versions, now compatible with 10.13 and above.
- Optimized thumbnails for 3mf files.
Bug Fix
- Fixed an issue where the digital board height was abnormal during PA calibration.
- Fixed the conflict between one wall on top surfaces and classical wall algorithm.
- Fixed a bug that excluded irregular IP addresses from the device list.
- Fixed a bug that crashed the ARM MacOS runtime.
- Fixed some running issues with Linux.
- Fixed a bug where retract override failed.