UltiMaker Cura 5.8.0-beta.1

New features and improvements

New Z Seam Settings

New settings have been added that let you tweak how and where the Z seam is placed

• "Z Seam On Vertex" allows you to choose if the Z seam is placed on the vertices closest to a selected Z seam position or if it instead follows the selected position exactly
• "Seam overhang angle" enables you to select the angle at which Z seams will not be printed on overhangs, resolves github.com/Ultimaker/Cura/issues/9369 ↗
• "Support Z Seam Away from Model" and "Min Z Seam Distance from Model" define where the Z seam is placed on supports

Add a heading (10)

Try it for yourself with this toast post-it holder.

Newly introduced Settings

• “Support Infill Density Multiplier Initial Layer”, “Raft Infill Overlap Percentage”, Raft Surface Z Offset, and Raft Flow settings to improve dual extrusion rafts
• “Cooling during extruder switch" to define the cooling fan behavior during an extruder switch by defining Unchanged, Only last extruder, All fans
• Updated the "Interleaved Prime Tower" with "Prime Tower Minimum Shell Thickness" so it uses less filament, contributed by @wawanbreton

Other Improvements

Add printer search bar

• A search bar has been added to the “Add an offline printer” list, resolves github.com/Ultimaker/Cura/issues/16716 ↗
• Updated the retract behavior for a nozzle switch to reduce the chance of oozing
• Updated Insert at Layer Change Post Processing Script so layers can be skipped, contributed by @tastyratz

Bug Fixes

Add a heading (9)

• Fixed a bug that caused spiked objects to have missing layers, thanks to @thomasrahm
• Updated the text in the Open Universal Cura Project (UCP) file to be more correct
• Fixed the interpolated values for fan speeds and improved the check for minimum layer time, resolves github.com/Ultimaker/Cura/issues/5409 ↗
• Fix a bug where materialprinttemp_prepend not being disabled, resolves github.com/Ultimaker/Cura/issues/19204 ↗
• Reduced the chance that oozing in the first travel move will cause a scar on the bottom of the model by updating the Layer Start X and Y, resolves github.com/Ultimaker/Cura/issues/19156 ↗
• Fixed a bug where a slice would fail if the overhang angle was set to 90 degrees
• Fixed a bug where infill lines are going through the model with a certain setting combination, resolves, github.com/Ultimaker/Cura/issues/18970, ↗ contributed by @thomasrahm
• Updated the temperature values in the monitor page to reflect the initial instead of the final bed and print temperatures, contributed by @GregValiant

Printer definitions, profiles, and materials:

3

• Introduced the Ultimaker Method with PLA, PVA, and N12CF profiles and intents
• Improved dual-support settings for UltiMaker Sline and Method printers
• Expanded and updated intents for Factor 4
• Updated CPE and PC settings to improve surface quality for Factor 4
• Introduced Creality Ender 3 V3 KE, contributed by @vadim-danilchik, @daitj, @VladislavVidenov, @fjventura20
• Introduced Voron2 StealthChanger 250, StealthChanger 300, and StealthChanger 350, contributed by @TheSin-
• Introduced K1 Max, contributed by @itay-grudev
• Introduced Ankermake M5C, contributed by @augustchi
• Introduced WEEDO F150S, F152S, F370, ME40, ME40 Lite, and X40 V3+, contributed by @WinstonMao

Known Issue

On our UltiMaker Method series machines:

1. Some raft-related values might initially appear incorrect in the printer settings list; but rest assured, they are correct and you can see them show up correctly when you refresh the fields by Collapsing All Categories with the hamburger next to the search and search for your setting again.
2. If you are experiencing some trouble having the model material stick to the PVA in the default settings, you can consider updating the support top distance 0.4 --> 0 and support roof line width 0.25 --> 0.4

Become a sponsor

If you like UltiMaker Cura, you can show your support with whatever you can miss. Every little bit helps. 🤗

You can become a Cura sponsor on GitHub here.