SlicerShelf
Main navigation
Independent release archive

OrcaSlicer

OrcaSlicer 1.1

Official release record for OrcaSlicer 1.1, published Aug 24, 2022.

Stable3 public packages390 recorded GitHub downloads

Official files in this release

macOS · 2 files

  • BambuStudio-SoftFever_v1.1-Mac_Intel.zipIntel / AMD 64-bit · 68.3 MiB · 113 downloads
    Official download ↗
  • BambuStudio-SoftFever_v1.1-Mac_m1.zipNot specified in filename · 66.0 MiB · 62 downloads
    Official download ↗

Windows · 1 files

Package changes from the previous release

Compared with 1.1.1.1-sf, the number of public application files changes from 1 to 3.

Platform

  • Windows0 → 1Added +1
  • macOS0 → 2Added +2
  • Not specified1 → 0No longer published −1

Architecture

  • Intel / AMD 64-bit0 → 2Added +2

Format

  • ZIP1 → 3Added +2

Counts are separate views of publisher filenames by platform, processor and format. They are not compatibility or support guarantees.

Release-note preview

A plain-text excerpt from the publisher’s release notes. Open the official release for the complete and current text.

Publisher notes are shown in their original source language. This excerpt is not machine-translated.

This build is based on Bambulab's V1.1.1.1 release.

Bambu Studio - SoftFever

A modified version of Bambu Studio. It has following changes:

  • ## Support third-party printers:
  • Voron 2.4
  • Voron Trident
  • Voron 0.1
  • Prusa MK3S
  • ## Export to to .gcode file.

export_gcode

  • ## Send gcode file to printer
  1. Setup connection

print_host

  1. Send to print

sendtoprint

  • ## Support single wall mode on first layer

singlewallfirst_layer

  • ## Support Chamber temperature. This setting can be use in machine start G-Gcode

chambertemperature chambertemperaturecustomgcode

  • ## Thumbview is supported

Demo video: youtu.be/vSNE9iGj2II ↗

NOTE:

- If you have troubles to run the build, you might need to install following runtimes:

- BambuStudio use G2/G3 commands by default. You need to turn on ARC support in your printer's firmware use with this slicer.

  • For Voron and any Klipper based printers:

You can enable gcode_arcs(G2/G3) support by adding following section into you printer.cfg file:

It's also recommended to add the following dummy macros to make Klipper happy

  • For Prusa MK3S:

ARC movement are supported by default.

Gallery

printers1 printers2 printers3 printers4 voron

Image credits:

  1. Voron 2.4 and Trident: vorondesign.com
  2. Voron 0.1: myself
  3. Prusa MK3S: Prusa3d
Official release ↗