SlicerShelf
Main navigation
Independent release archive

OrcaSlicer

OrcaSlicer 1.6.4-beta

Official release record for OrcaSlicer 1.6.4-beta, published Aug 3, 2023.

Stable4 public packages5,209 recorded GitHub downloads

Official files in this release

Linux · 1 files

  • OrcaSlicer_V1.6.4-beta_Linux.zipNot specified in filename · 95.6 MiB · 297 downloads
    Official download ↗

macOS · 2 files

  • OrcaSlicer_V1.6.4-beta_Mac_AppleSilicon_signed.zipNot specified in filename · 92.6 MiB · 585 downloads
    Official download ↗
  • OrcaSlicer_V1.6.4-beta_Mac_Intel_signed.zipIntel / AMD 64-bit · 96.7 MiB · 303 downloads
    Official download ↗

Windows · 1 files

Package changes from the previous release

Compared with 1.6.3, all classified package counts remain unchanged at 4 public files.

Counts are separate views of publisher filenames by platform, processor and format. They are not compatibility or support guarantees.

Release-note preview

A plain-text excerpt from the publisher’s release notes. Open the official release for the complete and current text.

Publisher notes are shown in their original source language. This excerpt is not machine-translated.

discord-mark-blue OrcaSlicer now has an official Discord server OrcaSlicer Discord ↗

What's Changed

  • QoL improvement: Orca Slicer now remembers each printer's filament, bed, and process settings, making it easier to switch between multiple printers
  • Single wall on top surface for Arachne by @Noisyfox in github.com/SoftFever/OrcaSlicer/pull/1583 ↗ — image

image

  • Some other updates for Pressure Advance calibration:
  1. Speed: All PA calibrations now use minimum speed at 100 mm/s (still subject to max flow rate) as PA effect is not obvious under slow speed (one also probably doesn't need it when printing at 45 mm/s speed).
  2. PA tower: Only one wall will be printed for most nozzles (0.4 upwards).

conical_overhang

image

Previously, in cases where sandwich mode was used, Orca would fallback to inner-outer wall order in certain edge cases. Now, it will fallback to outer-inner wall order.

  1. Turn off wipeonloops by default
  2. Change default wipe distance to 1 mm
  3. Reduce Seam gap to 10% by default
  • Overhang tweaks:
  1. Revert back to classic overhang slowdown
  2. Support percent for overhang speed
  • Tweak profiles for Voron/Qidi X Plus3/etc
  1. Fix Voron Trident printable height issue #1641
  2. Revamp Qidi X3 printer profiles
  3. Turn on acceltodecel_enable for klipper machine by default
  4. Many other profiles tweaks

Localization:

Last but not least, here are some miscellaneous changes:

New Contributors

Official release ↗