SlicerShelf
Navegação principal
Arquivo independente de versões

OrcaSlicer

OrcaSlicer 1.9.0-alpha

Registro oficial de OrcaSlicer 1.9.0-alpha, publicado em 24 de dez. de 2023.

Pré-lançamento5 pacotes públicos13.060 downloads do GitHub registrados

Arquivos oficiais desta versão

Linux · 1 arquivos

  • OrcaSlicer_Linux_V1.9.0-alpha.AppImageNão especificado no nome do arquivo · 108,1 MiB · 686 downloads
    Download oficial ↗

macOS · 2 arquivos

  • OrcaSlicer_Mac_arm64_V1.9.0-alpha.dmgARM64 · 126,6 MiB · 1.009 downloads
    Download oficial ↗
  • OrcaSlicer_Mac_x86_64_V1.9.0-alpha.dmgIntel / AMD 64-bit · 131,2 MiB · 789 downloads
    Download oficial ↗

Windows · 2 arquivos

  • OrcaSlicer_Windows_Installer_1.9.0-alpha.exeNão especificado no nome do arquivo · 84,5 MiB · 8.499 downloads
    Download oficial ↗
  • OrcaSlicer_Windows_V1.9.0-alpha_portable.zipNão especificado no nome do arquivo · 104,2 MiB · 2.077 downloads
    Download oficial ↗

Mudanças de pacotes desde a versão anterior

Em comparação com 1.8.1, todas as contagens classificadas permanecem iguais, com 5 arquivos públicos.

Canal da versão: Estável → Pré-lançamento.

As contagens são visões separadas dos nomes do publicador por plataforma, processador e formato. Não garantem compatibilidade ou suporte.

Prévia das notas

Trecho em texto simples das notas do publicador. Abra a versão oficial para o texto completo e atual.

As notas do publicador permanecem no idioma original. Este trecho não é traduzido automaticamente.

This is OrcaSlicer V1.9.0-alpha Release.

What's Changed

It's no secret that OrcaSlicer, as well as other Slic3r forks, has struggled with spiral vase mode, especially with models featuring sloped surfaces and large line widths. This new PR, introduced by @andrewboktor, presents an improved smooth spiral vase mode inspired by Ultimaker Cura. It effectively eliminates visible seams in spiral vases. image image

Originally developed by the PrusaSlicer team and beloved by many users, the Measure & Cut gizmos have now been ported to OrcaSlicer, thanks to @Noisyfox. image

image

This "Reverse only internal perimeters" option is an extension to reverse on odd reversal is not executed on external perimeters. The primary use case for this PR is to greatly reduce part stresses as they are now distributed in alternating directions, which should reduce warping, while maintaining external wall quality. This can be very useful for warp prone material, like ABS/ASA and also for elastic filaments like TPU and Silk PLA. image image

image

Watch the video ↗

This setting adds an extra wall every other layer. This way the infill gets caught between the walls, resulting in:

  • Theoretically, stronger prints due to better infill anchoring.
  • Allows for the infill/wall overlap to be set to low values without compromising object strength while maintaining external surface quality.
  • It may contribute to improving water tightness of models as the gaps between the top and bottom layers and the walls are overlapping.

image

image

  • Add ColPic encoding for thumbnails(;gimage/;simage) as metadata. This will enable showing preview images on QIDI/Elegoo/etc machines. QidiSlicer's implementation of this format is referenced. by @SoftFever

preview

image

image

  • Added a new handy model: Stanford bunny

This model is remixed by myself to make it 3d printable. Original model can be found at: graphics.stanford.edu/data/3Dscanrep/ ↗ image

Fixed a regression issue that wrong accel was used for PA Line by @SoftFever

Versão oficial ↗