SlicerShelf
Navegação principal
Arquivo independente de versões

OrcaSlicer

OrcaSlicer 1.8.1

Registro oficial de OrcaSlicer 1.8.1, publicado em 3 de dez. de 2023.

Estável5 pacotes públicos111.782 downloads do GitHub registrados

Arquivos oficiais desta versão

Linux · 1 arquivos

  • OrcaSlicer_Linux_V1.8.1.AppImageNão especificado no nome do arquivo · 98,3 MiB · 8.954 downloads
    Download oficial ↗

macOS · 2 arquivos

Windows · 2 arquivos

  • OrcaSlicer_Windows_Installer_1.8.1.exeNão especificado no nome do arquivo · 77,6 MiB · 71.294 downloads
    Download oficial ↗
  • OrcaSlicer_Windows_V1.8.1_portable.zipNão especificado no nome do arquivo · 96,5 MiB · 13.995 downloads
    Download oficial ↗

Mudanças de pacotes desde a versão anterior

Em comparação com 1.8.0, todas as contagens classificadas permanecem iguais, com 5 arquivos públicos.

As contagens são visões separadas dos nomes do publicador por plataforma, processador e formato. Não garantem compatibilidade ou suporte.

Prévia das notas

Trecho em texto simples das notas do publicador. Abra a versão oficial para o texto completo e atual.

As notas do publicador permanecem no idioma original. Este trecho não é traduzido automaticamente.

UPDATE:

Apple users: the build is not signed and notarized properly due to a CICD issue. New notarized build will be reuploaded soon. New builds have been uploaded

This is the official release of OrcaSlicer V1.8.1. In this version, we've fixed a few bugs from 1.8.0 to enhance stability. Additionally, we've added a few minor features.

What's Changed

Previously, OrcaSlicer would always use thick internal bridges. In this mode, Orca assumes the layer height is equal to the nozzle diameter, which may cause problems when using a large nozzle. Internal thick bridge off: Screenshot 2023-12-02 at 1 18 13 AM Internal thick bridge on: Screenshot 2023-12-02 at 1 17 41 AM

  • Internal Bridge Flow rate parameter introduction by @igiannakas

image

For detailed information about the precise wall feature, please refer to the WIKI ↗ image

  • Improve arc fitting (#2942) by @SoftFever
  • Fixed an issue that purge amount was incorrect when prime tower was not enabled for BBL printers (#2912) by @igiannakas
  • Fixed issue that application crashes occasionally when closing application (#2904) by @igiannakas
  • Fixed an issue that bed texture was black on AMD GPUs by @Noisyfox #2780
  • Fixed an issue that PA calibration Line method was not properly located when bed origin is not at (0,0) by @SoftFever

Printer profiles:

  • T500 profile fixes and optimizations (#2848)
  • Flashforge: Machine G-code Fix (#2922) by @FlashforgeOfficial

Translation updates:

  • Russian translation update (#2873) by @AndylgTom

Support

If you appreciate my work and would like to support me, consider buying me a coffee. Your support is greatly appreciated! :) ko-fi ↗

Versão oficial ↗