Sovol OrcaSlicer 2.3.0.4

SV08 & SV08 MAX Release Notes

Applicable Models: SV08 / SV08 MAX

🔧 Update Overview

1. Model Configuration Optimization

• Removed SV08PRO-related parameter configurations to focus on SV08 and SV08 MAX models.

2. SV08 Print Start Process Optimization

• Reduced impact of secondary homing on first-layer printing — Improved homing algorithm to minimize interference with first-layer printing height and increase success rate.
• Resolved overvoltage issue caused by startup sequence — Adjusted the heating sequence: heat the bed first, then execute the START_PRINT command to prevent power overload.

3. SV08 MAX Print Logic Fix

• Fixed unresponsiveness after initiating print to ensure immediate task execution.

4. System Process Simplification

• Disabled plugin installation to simplify the initialization process and improve system stability and startup speed.

5. UI Interaction Improvements

• Fixed the top-layer display issue for Sovol machines to enhance user experience.

⚠️ Notes

1. This update applies only to SV08 and SV08 MAX models.
2. If printing abnormalities occur, check whether the G-Code parameters match the printer model.

SV08 & SV08 MAX 更新说明

适用机型： SV08 / SV08 MAX

🔧 更新内容概览

1. 机型配置优化

• 移除 SV08PRO 相关参数配置，专注 SV08 和 SV08 MAX 机型支持。

2. SV08 打印启动流程优化

• 优化二次归零对首层打印的影响 — 调整归零算法，减少对首层打印高度的干扰，提升打印成功率。
• 解决启动顺序导致的过压问题 — 将加热流程调整为先升温热床，后执行 START_PRINT 指令，避免电源过载。

3. SV08 MAX 打印逻辑修复

• 修复开始打印后无动作响应的问题，确保打印任务立即执行。

4. 系统流程简化

• 关闭插件安装功能，简化初始化流程，提升系统稳定性和启动速度。

5. 界面交互优化

• 修复 Sovol 机器置顶显示问题，提升用户操作体验。

⚠️ 注意事项

1. 本次更新仅适用于 SV08 和 SV08 MAX 机型。
2. 如遇打印异常，请检查 G-Code 参数是否与机型匹配。