SlicerShelf
Hauptnavigation
Unabhängiges Release-Archiv

OrcaSlicer

OrcaSlicer 1.6.3-beta

Offizieller Release-Datensatz für OrcaSlicer 1.6.3-beta, veröffentlicht am 21. Mai 2023.

Vorabversion4 öffentliche Pakete5.165 erfasste GitHub-Downloads

Offizielle Dateien dieses Releases

Linux · 1 Dateien

macOS · 2 Dateien

Windows · 1 Dateien

Paketänderungen seit dem vorherigen Release

Gegenüber 1.6.2 bleiben alle klassifizierten Paketzahlen bei 4 öffentlichen Dateien unverändert.

Release-Kanal: Stabil → Vorabversion.

Die Zahlen sind getrennte Ansichten der Herausgeber-Dateinamen nach Plattform, Prozessor und Format. Sie sind keine Kompatibilitäts- oder Supportgarantie.

Vorschau der Release-Hinweise

Klartextauszug aus den Hinweisen des Herausgebers. Das offizielle Release enthält den vollständigen aktuellen Text.

Die Hinweise des Herausgebers bleiben in der ursprünglichen Quellsprache. Dieser Auszug ist nicht maschinell übersetzt.

Changes:

New features:

  • New calibration tests, refer to WIKI ↗ for more details
  1. Retraction

image

  1. Orca Tolerance Test

image

  • Improve bridging for classical wall generator when only one wall on top surface is used.

bridge_compare

  • Fan Speed Delay + Fan Kickstart Feature by @scottmudge

This feature enables the fan to start earlier than its target start time in order to compensate for the fan kick-in time. image

  • Support fullfanspeed_layer feature #85

Fan speed will be ramped up linearly from zero at layer to maximum at layer fullfanspeed_layer image

  • Number of slow layers #796

The first few layers are printed slower than normal. The speed is gradually increased in a linear fashion over the specified number of layers. image

  • Support interface fan speed #881

This fan speed is enforced during all support interfaces, to be able to weaken their bonding with a high fan speed. image

  • Streamlined WIKI Publish. Many thanks to @chrisribe
  • Merge BambuStudio v1.6.2 ↗ beta changes, including:
* Advanced cut with connectors: Thanks to @prusa3d for implementing this cool feature, and Bambu for porting it.
* Support for height range modifiers: Users can now add multiple height range modifiers to apply different settings.
* Support for sinking and slicing only the model part above the hot bed.

Newly supported printer models:

Special thanks to @fr3ak2402 for creating numerous printer profiles 👍

Bug fixes

  • Fixed an issue acceleration being set when disabled in PA line calibration by @mikebcbc
  • Optimized M106 command, write integer number instead of float
  • Fixed an issue that OrcaSlicer can't open previously generated gcode/.3mf file #712 #958
  • Fixed a regression: Generic filament profiles conflicts #981
  • Fixed a regression in layer time(log) view
  • Fixed an issue that Orcaslicer didn't jumping to device tab after sending job #520 #567 #1044 #1047
  • Fix build warnings, update deprecated boost headers by @scottmudge in github.com/SoftFever/OrcaSlicer/pull/1035 ↗
  • fix 2 script windows by @hliebscher in github.com/SoftFever/OrcaSlicer/pull/926 ↗

Localization

Offizielles Release ↗