SlicerShelf
Navegação principal
Arquivo independente de versões

OrcaSlicer

OrcaSlicer 1.6.3-beta

Registro oficial de OrcaSlicer 1.6.3-beta, publicado em 21 de mai. de 2023.

Pré-lançamento4 pacotes públicos5.165 downloads do GitHub registrados

Arquivos oficiais desta versão

Linux · 1 arquivos

  • OrcaSlicer_V1.6.3-beta_Linux.zipNão especificado no nome do arquivo · 107,5 MiB · 300 downloads
    Download oficial ↗

macOS · 2 arquivos

  • OrcaSlicer_V1.6.3-beta_Mac_AppleSilicon.zipNão especificado no nome do arquivo · 103,0 MiB · 439 downloads
    Download oficial ↗
  • OrcaSlicer_V1.6.3-beta_Mac_Intel.zipIntel / AMD 64-bit · 106,1 MiB · 329 downloads
    Download oficial ↗

Windows · 1 arquivos

  • OrcaSlicer_V1.6.3-beta_Win64.zipIntel / AMD 64-bit · 106,2 MiB · 4.097 downloads
    Download oficial ↗

Mudanças de pacotes desde a versão anterior

Em comparação com 1.6.2, todas as contagens classificadas permanecem iguais, com 4 arquivos públicos.

Canal da versão: Estável → Pré-lançamento.

As contagens são visões separadas dos nomes do publicador por plataforma, processador e formato. Não garantem compatibilidade ou suporte.

Prévia das notas

Trecho em texto simples das notas do publicador. Abra a versão oficial para o texto completo e atual.

As notas do publicador permanecem no idioma original. Este trecho não é traduzido automaticamente.

Changes:

New features:

  • New calibration tests, refer to WIKI ↗ for more details
  1. Retraction

image

  1. Orca Tolerance Test

image

  • Improve bridging for classical wall generator when only one wall on top surface is used.

bridge_compare

  • Fan Speed Delay + Fan Kickstart Feature by @scottmudge

This feature enables the fan to start earlier than its target start time in order to compensate for the fan kick-in time. image

  • Support fullfanspeed_layer feature #85

Fan speed will be ramped up linearly from zero at layer to maximum at layer fullfanspeed_layer image

  • Number of slow layers #796

The first few layers are printed slower than normal. The speed is gradually increased in a linear fashion over the specified number of layers. image

  • Support interface fan speed #881

This fan speed is enforced during all support interfaces, to be able to weaken their bonding with a high fan speed. image

  • Streamlined WIKI Publish. Many thanks to @chrisribe
  • Merge BambuStudio v1.6.2 ↗ beta changes, including:
* Advanced cut with connectors: Thanks to @prusa3d for implementing this cool feature, and Bambu for porting it.
* Support for height range modifiers: Users can now add multiple height range modifiers to apply different settings.
* Support for sinking and slicing only the model part above the hot bed.

Newly supported printer models:

Special thanks to @fr3ak2402 for creating numerous printer profiles 👍

Bug fixes

  • Fixed an issue acceleration being set when disabled in PA line calibration by @mikebcbc
  • Optimized M106 command, write integer number instead of float
  • Fixed an issue that OrcaSlicer can't open previously generated gcode/.3mf file #712 #958
  • Fixed a regression: Generic filament profiles conflicts #981
  • Fixed a regression in layer time(log) view
  • Fixed an issue that Orcaslicer didn't jumping to device tab after sending job #520 #567 #1044 #1047
  • Fix build warnings, update deprecated boost headers by @scottmudge in github.com/SoftFever/OrcaSlicer/pull/1035 ↗
  • fix 2 script windows by @hliebscher in github.com/SoftFever/OrcaSlicer/pull/926 ↗

Localization

Versão oficial ↗