SuperSlicer 2.3.57.6

known bug

• dense infill is at 100% instead of 40%, fixed in the nightly ↗ and next release

new

• bridge_overlap fix & redesign (now bridge density)
• now has a min setting.
• The density is now chosen between the two values to try to cover as much as possible the area to bridge, with the highest density possible.
• Remove the hardcoded invisible 87.5% density modifier. Replaced by setting by default the max at 90% and min at 80%
• Try to place the bridge at the right position (only works if the shape is simple).
• Known issue: the algo used for bridging can add a return line on top of an already extruded line. Have to do something about that.
• If you want to get back the old behaviour, set the two values to 87.5
• Add total layer count in the gcode footer #1886
• Add currentposition variable for gcode macro: currentposition[0] is x and current_position[1] is y #1898
• updated Vertex profiles (from vertex)

fixes

• fix externalperimetercut_corners (was extruding too much at the second segment and not enough at the 3rd) #1903
• typo & doc update (thanks oretzl)
• Print & printer custom variables are now scalar and not arrays.
• fix retraction calibration when temp%5 != 0 #1881
• fix crash on monotonic #1889 #1893
• other bugfixes #1877 #1891 #66

note: I haven't tested the linux & macos build. You can have daily builds in the action menu of github. You can support me with the "sponsor" button