Bambu Studio 1.10.0.74

This is a beta version (V1.10.0 Public Beta) that introduces features, improvements, and fixes according to user feedback. Please note that this version is still in the beta testing stage. 3MF files generated with this version are not compatible with MakerWorld. MakerWorld will prompt users to re-upload 3MF files generated by the official version of Bambu Studio.

Feature

1. Purge optimization: Without color bleeding, official multicolor prints with some color filaments achieve an average of 20.9% purge savings.

• Long retraction enabled for more materials: X/P/A series printer now supports long retraction for PLA Basic, PLA Matte, PLA Galaxy, PLA Marble, PLA Glow, PLA-CF, PETG HF, PETG Translucent, PETG-CF, ABS, ABS-GF, ASA, Support for PLA/PETG, and Support for ABS.
• Purge optimization for 12 colors: Purge savings are now supported for Bambu PLA Basic filaments in 12 colors (Red/Black/Brown/Gray/Yellow/Bambu Green/Blue Gray/Light Gray/Dark Gray/Purple/Blue/Orange), significantly reducing waste in multicolor prints using these filaments. (Note: Automatic purge optimization is currently limited to Bambu Lab's official filaments. Due to the variations in third-party filaments, consistent color change results cannot be guaranteed. For third-party filaments, please adjust settings manually).

Thanks to @SnK3DD ↗ for the cute pumpkin model. flush1 flush2

1. Brim ear tool: The new version allows automatic or manual addition of "mouse-ear-shaped" brims to specific object edges. In automatic mode, parameters are:

• Head diameter: Defines the size of the Brim Ear.
• Max angle: In automatic mode, the maximum angle for generating Brim Ear; edges above this threshold will not generate Brim Ear.
• Detect radius: Minimum radius detection in automatic mode.

Painted mode also allows adding or removing Brim Ears. More information in wiki.bambulab.com/en/software/bambu-studio/brim-ears. ↗ (github.com/bambulab/BambuStudio/issues/1281 ↗ ,github.com/bambulab/BambuStudio/issues/3618 ↗ ,github.com/bambulab/BambuStudio/issues/3290 ↗ ,github.com/bambulab/BambuStudio/issues/2002) ↗ brimear1 If you want to use the Brim Ear tool, you need to set the Brim Type to Painted mode first for it to take effect during slicing. brimear2_2

1. Scarf seam enabled for 3 materials by default: Bambu PLA Basic/Matte/Silk now default to Scarf Seam, with commonly used parameters relocated under filament settings for easier differentiation across materials.

scarfseam

1. Subnet binding support: Users can now bind printers across different subnets by directly entering the printer's IP address and Access Code.(github.com/bambulab/BambuStudio/issues/702 ↗ ,github.com/bambulab/BambuStudio/issues/4202 ↗ ,github.com/bambulab/BambuStudio/issues/4878 ↗ )

subnet

1. Edit filament information during printing: P-series and A-series printers now support editing filament information during printing, even for filaments not currently in use or in 'Auto-Fill' mode. This includes both external spool slots and AMS slots. Users can replace an empty spool before it's fully consumed, and the new spool will automatically continue the current print.（Supported P-series firmware version:01.07.00.00,supported A-series firmware version:01.04.00.00）

editfilamentinprinting

1. Auto calibration for A series: A-series printers now support auto-calibration triggering from the calibration page.(Supported A-series firmware version:01.04.00.00）

changhuichou

Improvements

1. Improved 3MF compatibility for multiple printer models: When switching between large and small print beds, automatic part arrangement and wipe tower repositioning prevent collisions with printed parts. This makes it easier to print X or P series 3MF project files on the A1 mini.(model from @linus3d ↗)

bigbedtosmall

1. Wipe tower collision risk reduction:

• Optimize the starting position of the printing wiper tower after material change, the initial print on the wipe tower sometimes had under-extrusion issues, and all layers of wipe tower have the same starting position, increasing the risk of collision. This optimization distributes the initial extrusion over four corners, reducing the accumulation of defects.
• Reducing the rivet length between the wipe tower's outer wall and infill to 0mm minimizes the risk of collision when switching between printing infill and outer walls.

liaota

1. Display estimated print end time: This is an estimated time for reference only and may have significant deviations in specific scenarios.(github.com/bambulab/BambuStudio/issues/3923 ↗ ,github.com/bambulab/BambuStudio/issues/4748 ↗ ,github.com/bambulab/BambuStudio/issues/4428 ↗ ,github.com/bambulab/BambuStudio/issues/3302 ↗ ,github.com/bambulab/BambuStudio/issues/2517) ↗

resttime

1. Retain color information after split to object/part: You no longer need to worry about losing color information when right-clicking to split an STL file.

spiltobjkeepcolor

1. Ironing inset feature: Controls ironing only in non-exterior wall areas, preventing uneven edges due to excessive material ironing.(github.com/bambulab/BambuStudio/issues/2872 ↗ )

ironinginset inroninginset2