SlicerShelf
Hoofdnavigatie
Onafhankelijk releasearchief

OrcaSlicer

OrcaSlicer 1.9.0-beta

Officieel releaserecord voor OrcaSlicer 1.9.0-beta, gepubliceerd op 30 dec 2023.

Voorversie5 openbare pakketten17.084 geregistreerde GitHub-downloads

Officiële bestanden in deze release

Linux · 1 bestanden

  • OrcaSlicer_Linux_V1.9.0-beta.AppImageNiet vermeld in bestandsnaam · 108,2 MiB · 790 downloads
    Officiële download ↗

macOS · 2 bestanden

Windows · 2 bestanden

  • OrcaSlicer_Windows_Installer_1.9.0-beta.exeNiet vermeld in bestandsnaam · 84,6 MiB · 11.290 downloads
    Officiële download ↗
  • OrcaSlicer_Windows_V1.9.0-beta_portable.zipNiet vermeld in bestandsnaam · 104,3 MiB · 2.579 downloads
    Officiële download ↗

Pakketwijzigingen sinds de vorige release

Vergeleken met 1.9.0-alpha blijven alle ingedeelde pakketaantallen gelijk, met 5 openbare bestanden.

De aantallen zijn afzonderlijke doorsneden van bestandsnamen van de uitgever op platform, processor en formaat. Ze zijn geen garantie voor compatibiliteit of ondersteuning.

Voorbeeld van release-opmerkingen

Een platte-tekstfragment uit de release-opmerkingen van de uitgever. Open de officiële release voor de volledige en actuele tekst.

De opmerkingen van de uitgever staan in de oorspronkelijke brontaal. Dit fragment is niet automatisch vertaald.

This is OrcaSlicer V1.9.0 beta release. This update introduces new features and resolves several bugs identified in the previous Alpha version.

Known issues:

  1. Bambu Printer Users: OrcaSlicer may crash if you switch to the device page before the printer connection is established. The fix is ready and will be included in the next release. As a workaround, please wait for 10-30 seconds after launching OrcaSlicer before switching to the device page.

What's Changed

This feature is originally implemented in SuperSlicer by @supermerill and ported into OrcaSlicer by @igiannakas in github.com/SoftFever/OrcaSlicer/pull/3287 ↗ By moving the deretraction position of outer walls to the inside of the model, this feature can improve the seams of the model when sandwich or outer-inner print order is used. image image image provided by community member @pemerick07

  • QoL: removed P1PP1S profile mismatching warning by @SoftFever
  • Enhanced update notification system: Orca now allows users to opt for 'stable updates only' in the preferences section by @SoftFever

Fixed bugs:

  • Fixed a regression issue that --datadir was broken in V1.9.0-alpha by @SoftFever
  • Fixed an issue where exclude_object code freezes printers running on old versions of Marlin/RRF firmwares which don't have this feature enabled as it was enabled by default in OrcaSlicer. This feature is now disabled by default. Klipper firmware won't freeze even if this feature is not enabled, so I have adjusted most Klipper-based profiles to enable it. Please check your profile just to make sure if it's on/off based on your actual situation/need.
  • Fixed an issue that the legend window expands to all available horizontal space if scrollbar is displayed by @Noisyfox
  • Fixed a bug that spiralmodemaxxysmoothing was not hiden when vase is not enabled by @SoftFever
  • Fixed a regression that Turkish lang option was missing in V1.9.0-alpha by @SoftFever
  • Fixed an issue that layer height can be set to zero by @SoftFever
  • Fixed an that exclude_object option was hidden for Marlin/RRF firmwares by @SoftFever
  • Fixed typo by @bistory in github.com/SoftFever/OrcaSlicer/pull/3331 ↗
  • Update README.md by @eltociear in github.com/SoftFever/OrcaSlicer/pull/3281 ↗

Printer profiles:

Translation updates:

Officiële release ↗