SlicerShelf
Hoofdnavigatie
Onafhankelijk releasearchief

OrcaSlicer

OrcaSlicer 1.6.4-beta3

Officieel releaserecord voor OrcaSlicer 1.6.4-beta3, gepubliceerd op 14 aug 2023.

Stabiel4 openbare pakketten16.908 geregistreerde GitHub-downloads

Officiële bestanden in deze release

Linux · 1 bestanden

  • OrcaSlicer_Linux_V1.6.4-beta3.zipNiet vermeld in bestandsnaam · 96,4 MiB · 1.492 downloads
    Officiële download ↗

macOS · 2 bestanden

Windows · 1 bestanden

  • OrcaSlicer_Windows_V1.6.4-beta3.zipNiet vermeld in bestandsnaam · 94,4 MiB · 13.054 downloads
    Officiële download ↗

Pakketwijzigingen sinds de vorige release

Vergeleken met 1.6.4-beta2 verandert het aantal openbare programmabestanden van 4 naar 4.

Architectuur

  • Intel / AMD 64-bit2 → 1Niet meer gepubliceerd −1
  • ARM640 → 1Toegevoegd +1

Formaat

  • DMG0 → 2Toegevoegd +2
  • ZIP4 → 2Niet meer gepubliceerd −2

De aantallen zijn afzonderlijke doorsneden van bestandsnamen van de uitgever op platform, processor en formaat. Ze zijn geen garantie voor compatibiliteit of ondersteuning.

Voorbeeld van release-opmerkingen

Een platte-tekstfragment uit de release-opmerkingen van de uitgever. Open de officiële release voor de volledige en actuele tekst.

De opmerkingen van de uitgever staan in de oorspronkelijke brontaal. Dit fragment is niet automatisch vertaald.

This is the last beta release of V1.6.4

discord-mark-blue OrcaSlicer now has an official Discord server OrcaSlicer Discord ↗

What's Changed

  • Mac User Notification: OrcaSlicer is now fully notarized. Say goodbye to command-line hacks! Drag and drop to Applciations folder and you are ready to go. A special thanks to @RaySajuuk for helping troubleshoot the notarization issue.

Screenshot 2023-08-14 at 8 48 42 PM

  • Ported "mouse ear brims" feature from SuperSlicer by @Noisyfox. — Big shoutout to @Noisyfox to bring many awesome features to OrcaSlicer!

mouse_ear

  • Introduced a new "One Wall Threshold" parameter that allows more control over the One wall on top surfaces behavior

image

  • OrcaSlicer now supports adjusting the internal bridge speed independently, enabling users to achieve fast prints while maintaining quality. This feature was inspired by SuperSlicer, and its implementation was referenced.
  • Fixed a bug that overhang slowdown won't work when support's top z distance is set to 0 #1763
  • Added support for chamber temperature settings per filament type #1160
  • Increased the line width limit to five times the nozzle diameter. #1745
  • Optimize new overhang slowdown(fan command and bridge) and re-enable it, this overhang slowdow was orignally ported from PrusaSlicer2.6 #1642
  • Fixed an issue where OrcaSlicer couldn't establish a TLS connection with the printer on Mac. Special thanks to @samwiseg0 and @ammmze for finding, troubleshooting, and resolving this issue together! True open-source community spirit! #1675
  • Pick and merged features/bug fixes from BambuStudio 1.7x:
  • Support Object exclusion for BambuLab X1/X1C- ported from BambuStudio
  • Add Fill bed with copies - ported from BambuStudio and PrusaSlicer
  • Support internalsolidinfill_pattern - ported from BambuStudio
  • New Boolean operation feature - ported from BambuStudio
  • Some other fixes(including full screen bug) from BambuStudio 1.7x

Printer profiles updates:

  • Added Anycubic Kobra 2 by @leecolarelli
  • AnkerMake Profile revise and additions by @just-trey
  • Many tweaks to all profiles

Localization:

Misc

NOTE:

1. Please check here ↗for installation instructions. 2. If your profiles didn't show up after updating, please restart OrcaSlicer 3. Klipper users, please update Moonraker to the latest version so that it can recognize OrcaSlicer and parse metadata like thumbnails. 4. If you're running Klipper, it's strongly recommended to add the following configuration to your printer.cfg file.

If you like my work and would like to show your appreciation, you can buy me a coffee :)

ko-fi ↗

Officiële release ↗