SlicerShelf
Hoofdnavigatie
Onafhankelijk releasearchief

UltiMaker Cura

UltiMaker Cura 5.8.0

Officieel releaserecord voor UltiMaker Cura 5.8.0, gepubliceerd op 1 aug 2024.

Stabiel8 openbare pakketten457.089 geregistreerde GitHub-downloads

Officiële bestanden in deze release

Linux · 1 bestanden

macOS · 4 bestanden

Windows · 2 bestanden

Niet vermeld · 1 bestanden

Pakketwijzigingen sinds de vorige release

Vergeleken met 5.8.0-beta.1 verandert het aantal openbare programmabestanden van 7 naar 8.

Releasekanaal: Voorversie → Stabiel.

Platform

  • Niet vermeld0 → 1Toegevoegd +1

Architectuur

  • Niet vermeld in bestandsnaam0 → 1Toegevoegd +1

Formaat

  • ZIP0 → 1Toegevoegd +1

De aantallen zijn afzonderlijke doorsneden van bestandsnamen van de uitgever op platform, processor en formaat. Ze zijn geen garantie voor compatibiliteit of ondersteuning.

Voorbeeld van release-opmerkingen

Een platte-tekstfragment uit de release-opmerkingen van de uitgever. Open de officiële release voor de volledige en actuele tekst.

De opmerkingen van de uitgever staan in de oorspronkelijke brontaal. Dit fragment is niet automatisch vertaald.

New features and improvements

New Z Seam Settings

New settings have been added that let you tweak how and where the Z seam is placed

  • "Z Seam On Vertex" allows you to choose if the Z seam is placed on the vertices closest to a selected Z seam position or if it instead follows the selected position exactly
  • "Seam overhang angle" enables you to select the angle at which Z seams will not be printed on overhangs, resolves github.com/Ultimaker/Cura/issues/9369 ↗
  • "Support Z Seam Away from Model" and "Min Z Seam Distance from Model" define where the Z seam is placed on supports

Add a heading (10)

Try it for yourself with this toast post-it holder.

Newly introduced Settings

  • “Support Infill Density Multiplier Initial Layer”, “Raft Infill Overlap Percentage”, Raft Surface Z Offset, and Raft Flow settings to improve dual extrusion rafts
  • “Cooling during extruder switch" to define the cooling fan behavior during an extruder switch by defining Unchanged, Only last extruder, All fans
  • Updated the "Interleaved Prime Tower" with "Prime Tower Minimum Shell Thickness" so it uses less filament, contributed by @wawanbreton

Other Improvements

Add printer search bar

  • A search bar has been added to the “Add an offline printer” list, resolves github.com/Ultimaker/Cura/issues/16716 ↗
  • Updated the retract behavior for a nozzle switch to reduce the chance of oozing
  • Updated Insert at Layer Change Post Processing Script so layers can be skipped, contributed by @tastyratz

Bug Fixes

Add a heading (9)

  • Fixed a bug that caused spiked objects to have missing layers, thanks to @thomasrahm
  • Updated the text in the Open Universal Cura Project (UCP) file to be more correct
  • Fixed the interpolated values for fan speeds and improved the check for minimum layer time, resolves github.com/Ultimaker/Cura/issues/5409 ↗
  • Fix a bug where materialprinttemp_prepend not being disabled, resolves github.com/Ultimaker/Cura/issues/19204 ↗
  • Reduced the chance that oozing in the first travel move will cause a scar on the bottom of the model by updating the Layer Start X and Y, resolves github.com/Ultimaker/Cura/issues/19156 ↗
  • Fixed a bug where a slice would fail if the overhang angle was set to 90 degrees
  • Fixed a bug where infill lines are going through the model with a certain setting combination, resolves, github.com/Ultimaker/Cura/issues/18970, ↗ contributed by @thomasrahm
  • Updated the temperature values in the monitor page to reflect the initial instead of the final bed and print temperatures, contributed by @GregValiant

Bugs resolved during the Beta

  • Fixed a bug where gaps would appear in generated tree support, resolves github.com/Ultimaker/Cura/issues/19442 ↗
  • Raft-related values that appeared incorrectly when switching extruders now show the correct values
  • Seam not on Vertex has been fixed for multiple models on the buildplate
  • Exported cura:setting keys in material definitions now correctly shows True instead of yes
  • .makerbot file types are now selected by default when saving those files to the Digital Library
  • For the UltiMaker Method series machines Support Interface, Tower, and Horizontal Expansion settings have been updated.
  • For all UltiMaker Machines the Zseam settings have been updated so they are smartly hidden, except for the visual intents.

Printer definitions, profiles, and materials:

3

  • Introduced the Ultimaker Method with PLA, PVA, and N12CF profiles and intents
  • Improved dual-support settings for UltiMaker Sline and Method printers
  • Expanded and updated intents for Factor 4
  • Updated CPE and PC settings to improve surface quality for Factor 4
  • Introduced Creality Ender 3 V3 KE, contributed by @vadim-danilchik, @daitj, @VladislavVidenov, @fjventura20
  • Introduced Voron2 StealthChanger 250, StealthChanger 300, and StealthChanger 350, contributed by @TheSin-
  • Introduced K1 Max, contributed by @itay-grudev
  • Introduced Ankermake M5C, contributed by @augustchi
  • Introduced WEEDO F150S, F152S, F370, ME40, ME40 Lite, and X40 V3+, contributed by @WinstonMao

Become a sponsor

If you like UltiMaker Cura, you can show your support with whatever you can miss. Every little bit helps. 🤗

You can become a Cura sponsor on GitHub here.

Officiële release ↗