SuperSlicer 2.3.57.0

Merged with PrusaSlicer 2.3.3

Note: The stable version is the 2.3.56.9, below.

new settings

• Setting to remove unwanted bottom/top fill on slopes #253 #426 #1090

image

• 'completeobjectsone_brim' to print one big brim for the whole plater to be able to pack the object closer to each other.
• now takes into account per-object brim for auto-arrange & complete_object check
• Setting to create the skirt's brim #795
• Setting to decide from what the skirt is drawn (objects or brim) #747
• Setting to decrease elephant foot compensation on multiple layers, from a pr by @bitblaster
• Setting for infill/internal bridge fan speed #1414
• Setting for wipe speed #1471
• Setting to set a minimum first layer speed #1422
• Setting to allow gapfill between the most inner perimeter if the gap is narrow enough #982
• Setting to rotate polyholes on each each layer. #1396
• Setting for travel acceleration
• now deceleration for the travel is done with the acceleration value of the next extrusion
• reprap M204 now use P & T
• Setting to forbid some characters in the gcode filename #1518 (plain characters or regexp)
• 'Max gcode command per second' added to replace the 'min_length' setting. To avoid stuttering in 16bit microcontrollers or serial interface bottleneck.

Gui changes

• G2 & G3 gcode-viewer support (ArcWelder) #1456
• reworked autospeed & ironing role:
• now only extrusions type with a "0" speed are taken into account for autospeed computation
• ironing pattern now use ironing role like ironing PP
• ironingspeed is now a float or percent, over topsolidinfillspeed
• Adding sections to general preference.
• Improved progress message (when creating perimeters, infill and gcode, so you can have an idea of how long it will take)
• Add a GUI Preference option (Default: yes) to show the overwrite dialog for regular file output or not. By @lordofhyphens
• Don't refresh the 3D view unless really necessary (should reduce memory consumption & increase responsiveness when the slicing is finished) edit: it doesn't refresh often enough, even when necessary

Other changes

• GCode double->string conversion improvement (remove trailing zeros) for reducing gcode size
• settings directory is now taken from a "configuration" directory if it exists next to the "resources" one (Allow to create a "portable version" without the --datadir command line option) #1212
• layer height & first layer height light update
• test if the values are good before slicing.
• first layer height with % now use the (thinnest) extruder used by the object
• fix skirts when using different nozzle diameters (print it wide enough for the biggest if %)
• allow to --load a config bundle with command line #1490
• it won't save it, contrary to the "import config bundle"
• If the config bundle only contains the [presets] section, it will just try to select the presets.
• sequential printing: Disable clearance check if set to 0
• updates to russian & french translations

bugfixes

• fix icon for sla
• fix some perimeter & infill slicing issues
• remove hysteresis for overhang detection #1464
• fix error when changing the type of seam position #1485
• fix some errors in Layouts #1480
• fix exporttoprusa for object & modifer settings that need the full config as reference #1503

note: I haven't tested the linux & macos build. You can have daily builds in the action menu of github. You can support me with the "sponsor" button