SlicerShelf
Navigation principale
Archive indépendante des versions

OrcaSlicer

OrcaSlicer 2.1.0-beta

Fiche officielle de OrcaSlicer 2.1.0-beta, publiée le 31 mai 2024.

Préversion5 paquets publics77 397 téléchargements GitHub enregistrés

Fichiers officiels de cette version

Linux · 1 fichiers

macOS · 2 fichiers

Windows · 2 fichiers

  • OrcaSlicer_Windows_Installer_V2.1.0-beta.exeNon indiqué dans le nom du fichier · 87,7 MiB · 56 383 téléchargements
    Téléchargement officiel ↗
  • OrcaSlicer_Windows_V2.1.0-beta_portable.zipNon indiqué dans le nom du fichier · 107,8 MiB · 8 185 téléchargements
    Téléchargement officiel ↗

Évolution des paquets depuis la version précédente

Par rapport à 2.0.0, tous les décomptes classés restent inchangés avec 5 fichiers publics.

Canal de version : Stable → Préversion.

Les décomptes sont des vues séparées des noms de fichiers de l’éditeur par plateforme, processeur et format. Ils ne garantissent ni compatibilité ni assistance.

Aperçu des notes de version

Extrait en texte brut des notes de l’éditeur. Ouvrez la version officielle pour le texte complet et actuel.

Les notes de l’éditeur restent dans leur langue source. Cet extrait n’est pas traduit automatiquement.

This is OrcaSlicer V2.1.0 beta release.

What's Changed

  • Orca Slicer now features brand-new icons, thanks to @yw4z in github.com/SoftFever/OrcaSlicer/pull/4368 ↗ — These icons are designed to be more consistent, modern, and pixel-perfect, offering better color contrast. They align seamlessly with the new design of Orca Slicer. A big thanks to @yw4z for these new icons and numerous UI improvements! — image
  • Orca Slicer now support open/import model from Prinables.com/Thingiverse.com/makerworld.com directly by @SoftFever and @Ocraftyone (#5486, #5416, #3823) — No more manual downloads! You can now open models directly from these sites, and Orca Slicer will automatically import them for you.

printables thingiverse mw

You can enable this feature in the Preferences dialog. Please note that this feature is currently available only for Windows.

image

  • Infill direction enhancements by @SoftFever in github.com/SoftFever/OrcaSlicer/pull/5267 ↗ — With the new enhancements, Orca Slicer now allows users to set sparse and solid infill directions independently. Users can also disable solid infill direction rotation, which is particularly useful when printing with transparent materials.

github.com/SoftFever/OrcaSlicer/assets/103989404/9ccdb6e7-2030-4e73-a2a2-0691102181a4 ↗

In this release, a new infill pattern called CrossHatch has been introduced into Orca(thanks to BambuStudio). This pattern is similar to Gyroid and the new 3D HoneyComb introduced in OrcaSlicer 2.0 RC ↗ but offers even faster printing speeds. Orca has further optimized this infill pattern to enhance its performance at low infill densities.

Before: image

After: image

  • Support larger printer by @SoftFever in github.com/SoftFever/OrcaSlicer/pull/5320 ↗ — Orca Slicer previousely only support printer bed sizes smaller than 2147mm x 2147mm due to the limitations of the 32-bit data type. — This limitation also applies to the maximum number of platers you can create for a project. — The total width/length of all the plates cannot exceed this limit. — Orca Slicer now support sizes as large as desired. — For convenience, the limit is currently set to 214m x 214m x 214m. — SuperSlicer is referenced for some changes. — image

Fixed a bug that overhang slowdown may slowdown too much in some cases. before, it slowed down to 4 mm/s despite we had minimal speed to 10:

image

after:

image

  • SEMM: Introduced parameter to control the maximum speed used for purging in the purge tower by @igiannakas in github.com/SoftFever/OrcaSlicer/pull/5304 ↗ — Previousely the speed limit is set to 90mm/sec which works well; however speed gains can be made by increasing this if the printer is able to bridge at higher speeds in the wipe tower. — A max speed limit has been introduced for the purge tower. The existing, as is limits of volumetric flow for the filament and sparse infill speeds are respected. Same for the ramping up of purge speed up to the limit.
  • Adjustable infill wall overlap for top and bottom surfaces by @igiannakas in github.com/SoftFever/OrcaSlicer/pull/4832 ↗ — This new option allows for independent adjustment of the infill/wall overlap for internal solid and sparse infill and top and bottom surfaces.
  • Touchpad-friently 3d navigation by @buzzhuzz in github.com/SoftFever/OrcaSlicer/pull/4598 ↗ — Implement FreeCAD-inspired touchpad navigation mode. — This mode makes 3d model inspection easier for devices with touchpad as the only pointer device. — Controls: — Shift+move: panning — Alt+move: rotation

github.com/SoftFever/OrcaSlicer/assets/46728448/9cfffdb1-853b-4ac8-9a14-48a9f61f2f6b ↗

  • Orca Slicer default parameter tweaks by @SoftFever in github.com/SoftFever/OrcaSlicer/pull/5406 ↗ — Some parameters are tweaked to improve the print quality and speed for all printers — Gap fill are now disabled by default — topsurfacepattern are not default to Monotonic Line — Sparse infill pattern are now default to Cross hatch — etc
  • Fixed a bug that top surface was mistaken as bridge in some cases by @SoftFever in github.com/SoftFever/OrcaSlicer/pull/4678 ↗

image

  • Precise Z Height

image When enabled, this option ensures the accurate Z height of the model after slicing, even if the model height is not a multiple of the layer height. For example, slicing a 20mm x 20mm x 20.1mm cube with a layer height of 0.2mm would typically result in a final height of 20.2mm due to the layer height increments. By enabling this parameter, the layer height of the last five layers is adjusted so that the final sliced height matches the actual object height, resulting in an accurate 20.1mm (as shown in the picture). This feature is ported from BambuStudio.

Version officielle ↗