SlicerShelf
Navigation principale
Archive indépendante des versions

OrcaSlicer

OrcaSlicer 1.9.0-alpha

Fiche officielle de OrcaSlicer 1.9.0-alpha, publiée le 24 déc. 2023.

Préversion5 paquets publics13 060 téléchargements GitHub enregistrés

Fichiers officiels de cette version

Linux · 1 fichiers

macOS · 2 fichiers

Windows · 2 fichiers

  • OrcaSlicer_Windows_Installer_1.9.0-alpha.exeNon indiqué dans le nom du fichier · 84,5 MiB · 8 499 téléchargements
    Téléchargement officiel ↗
  • OrcaSlicer_Windows_V1.9.0-alpha_portable.zipNon indiqué dans le nom du fichier · 104,2 MiB · 2 077 téléchargements
    Téléchargement officiel ↗

Évolution des paquets depuis la version précédente

Par rapport à 1.8.1, tous les décomptes classés restent inchangés avec 5 fichiers publics.

Canal de version : Stable → Préversion.

Les décomptes sont des vues séparées des noms de fichiers de l’éditeur par plateforme, processeur et format. Ils ne garantissent ni compatibilité ni assistance.

Aperçu des notes de version

Extrait en texte brut des notes de l’éditeur. Ouvrez la version officielle pour le texte complet et actuel.

Les notes de l’éditeur restent dans leur langue source. Cet extrait n’est pas traduit automatiquement.

This is OrcaSlicer V1.9.0-alpha Release.

What's Changed

It's no secret that OrcaSlicer, as well as other Slic3r forks, has struggled with spiral vase mode, especially with models featuring sloped surfaces and large line widths. This new PR, introduced by @andrewboktor, presents an improved smooth spiral vase mode inspired by Ultimaker Cura. It effectively eliminates visible seams in spiral vases. image image

Originally developed by the PrusaSlicer team and beloved by many users, the Measure & Cut gizmos have now been ported to OrcaSlicer, thanks to @Noisyfox. image

image

This "Reverse only internal perimeters" option is an extension to reverse on odd reversal is not executed on external perimeters. The primary use case for this PR is to greatly reduce part stresses as they are now distributed in alternating directions, which should reduce warping, while maintaining external wall quality. This can be very useful for warp prone material, like ABS/ASA and also for elastic filaments like TPU and Silk PLA. image image

image

Watch the video ↗

This setting adds an extra wall every other layer. This way the infill gets caught between the walls, resulting in:

  • Theoretically, stronger prints due to better infill anchoring.
  • Allows for the infill/wall overlap to be set to low values without compromising object strength while maintaining external surface quality.
  • It may contribute to improving water tightness of models as the gaps between the top and bottom layers and the walls are overlapping.

image

image

  • Add ColPic encoding for thumbnails(;gimage/;simage) as metadata. This will enable showing preview images on QIDI/Elegoo/etc machines. QidiSlicer's implementation of this format is referenced. by @SoftFever

preview

image

image

  • Added a new handy model: Stanford bunny

This model is remixed by myself to make it 3d printable. Original model can be found at: graphics.stanford.edu/data/3Dscanrep/ ↗ image

Fixed a regression issue that wrong accel was used for PA Line by @SoftFever

Version officielle ↗