UltiMaker Cura 5.7.0

New features and improvements

Universal Cura Project files

Universal Cura Project files contain models and settings and can be shared with people who have different printers. They can be used on any printer and they allow you to include positional data for the models on your build plate as well as select settings. Visit our Thingiverse page to download this amazing Dinosaur SD Card Holder to try the ease of sharing settings yourself.

1

Open print files directly from Thingiverse

You can now open files in Cura directly from Thingiverse with a single click. You can find a “Open in Cura” button on all compatible file types which includes models that use the STL, 3MF, and OBJ file extension. Doing so will load the file into Cura just as if you had downloaded it and opened it normally with the added advantage that your downloads folder will not get clogged. Visit Thingiverse to try it out for yourself.

3

Newly introduced Settings

• Settings that define the raft offset for top, middle and bottom raft layers
• Brim only on the inside setting, resolves github.com/Ultimaker/Cura/issues/2853 ↗
• Introduced a new Prime tower type: Interleaved, next to the current Normal, contributed by @wawanbreton
• Apply Monotonic ordering to the Raft Top Surface
• Raft Wall Line Count for the Bottom, Middle, and Top of the raft
• Allowing to define print sequence manually, contributed by @alexandr-vladimirov

image

image

MethodX and MethodXL specific improvements

For the best experience with your MethodX and MethodXL please update to 5.7.1 ↗

• Enabled Print over Cloud for UltiMaker MethodX and Method XL printers
• Introduced ASA, SR30, and Nylon12-CF profiles for MethodX and Method XL Printers. The latest firmware version that supports these materials is available here ↗.
• Improved the predicted printing time so it's closer to the actual printing time on the MethodX and MethodXL
• Improved the idle nozzle temperature for dual extrusion printing on MethodX and MethodXL
• Resolved a crash for the Method printer when navigating to the Monitor tab
• Improved the way that the fanspeeds were listed and controlled for MethodX and MethodXL printers
• Updated Raft settings for UltiMaker MethodX and MethodXL
• Enabled Monotonic Raft Surface to improve adhesion
• Increased the Minimum Retract Distance to improve infill pattern wall overlaps

Other improvements

• Introduced an analyzing tool in the cura engine to better track slicing crashes, and started fixing the biggest reports coming in.
• The play speed of the nozzle in the preview is now closer to the movement of the printhead
• Introduced an option to choose Drop Model to Buildplate every time a project file is loaded
• Introduced DisplayInfoOnLCD Post Processing Script which combines DisplayFilenameAndLayerOnLCD with DisplayProgress, contributed by @GregValiant
• Introduced alternative camera navigation similar to FreeCAD Trackpad, contributed by @quarnster

Bug fixes

• Resolved significantly slower slicing for models with a lot of holes
• A significant amount of crashes have been resolved that are caused by self intersecting polygons
• Align to Buildplate did not work for grouped meshes, resolves github.com/Ultimaker/Cura/issues/14237 ↗
• The models in a 3mf file would not load in their saved position, please note that this also changes the behavior of the "import models" feature of a 3mf file, for this feature the saved model location will be ignored
• Reduced the amount of floating support in areas near the support overhang angle threshold
• Fixed a bug with the Initial Extruder Number in the start gcode, resolves github.com/Ultimaker/Cura/issues/17501 ↗
• Fixed a bug where Z could be negative if Remove Empty Layers was enabled, resolves github.com/Ultimaker/Cura/issues/15975 ↗
• Pressing the Esc key now doesn't exiting full screen mode, contributed by @Sophist-UK, resolves github.com/Ultimaker/Cura/issues/7499 ↗
• Improved the OAuth protocol to improve signing in with plug-ins, contributed by @wawanbreton
• Fixed tree support-related crashes if there are no overhangs, contributed by @thomasrahm
• Fixed some slicing crashes with tree support, contributed by @ThomasRahm
• Fixed available height when adding modifier mesh in One at a Time printing, contributed by @fieldofView resolves github.com/Ultimaker/Cura/issues/16566 ↗
• Improved behavior for loading 3mfs by giving the models original names, contributed by @pietchaki, resolves github.com/Ultimaker/Cura/issues/12089 ↗
• Added an error so LimitXYAccelJerk doesn't run unless Accel Control is enabled in Cura, contributed by @Gregvaliant
• Some helpful code cleanup contributed by @dmitrygribenchuk

Bugs resolved since the Beta Release:

• Resolved some crashes when opening project files
• Resolved the biggest crashes coming in via the analyzing tool in the cura engine
• Added links to support pages for Method materials to help find the best material compatibility
• Introduced several visual improvements for the loading Universal Cura Projects window
• Universal Cura Projects will now be opened in the center of the buildplate
• The prime tower no longer primes extruders that are not being used
• Fixed file association for stl, obj, 3mf, gcode, and ufp for MacOS
• MacOS users can use the open menu multiple times in a row again
• The support type is now updated in recommended when it’s changed in custom
• The skirt height is now generated on the innermost skirt instead of the outermost skirt again
• Fixed the skirt distance for dual extrusion printers
• The Brim Only Inside setting will not generate a brim on support when it’s not defined
• Fixed a bug where the project name would accidentally revert after saving, resolves github.com/Ultimaker/Cura/issues/11276 ↗
• Improved handling of a fractional layer with tree support, contributed by @ThomasRahm