SlicerShelf
Navegación principal
Archivo independiente de versiones

OrcaSlicer

OrcaSlicer 2.2.0-beta

Registro oficial de OrcaSlicer 2.2.0-beta, publicado el 14 sept 2024.

Versión previa6 paquetes públicos90.540 descargas de GitHub registradas

Archivos oficiales de esta versión

Linux · 2 archivos

  • OrcaSlicer_Linux_Ubuntu2004_V2.2.0-beta.AppImageNo especificado en el nombre del archivo · 109,2 MiB · 2511 descargas
    Descarga oficial ↗
  • OrcaSlicer_Linux_Ubuntu2404_V2.2.0-beta.AppImageNo especificado en el nombre del archivo · 110,2 MiB · 3335 descargas
    Descarga oficial ↗

macOS · 2 archivos

Windows · 2 archivos

  • OrcaSlicer_Windows_Installer_V2.2.0-beta.exeNo especificado en el nombre del archivo · 87,6 MiB · 65.754 descargas
    Descarga oficial ↗
  • OrcaSlicer_Windows_V2.2.0-beta_portable.zipNo especificado en el nombre del archivo · 106,4 MiB · 8216 descargas
    Descarga oficial ↗

Cambios de paquetes desde la versión anterior

Frente a 2.1.1, el número de archivos públicos de la aplicación cambia de 5 a 6.

Canal de versión: Estable → Versión previa.

Plataforma

  • Linux1 → 2Añadidos +1

Arquitectura

  • No especificado en el nombre del archivo3 → 4Añadidos +1

Formato

  • APPIMAGE1 → 2Añadidos +1

Los recuentos son vistas separadas de los nombres del editor por plataforma, procesador y formato. No garantizan compatibilidad ni soporte.

Vista previa de notas

Extracto en texto plano de las notas del editor. Abre la versión oficial para el texto completo y actual.

Las notas del editor se muestran en su idioma original. Este extracto no está traducido automáticamente.

This is OrcaSlicer V2.2.0 beta release.

🚨🚨🚨Important Security Alert🚨🚨🚨

Please be aware that "orcaslicer.net" is NOT an official website for OrcaSlicer and may be potentially malicious. This site appears to use AI-generated content, lacking genuine context, and seems to exist solely to profit from advertisements. Worse, it may redirect download links to harmful sources. For your safety, avoid downloading OrcaSlicer from this site as the links may be compromised.

The only official platforms for OrcaSlicer are our GitHub project page and the official Discord channel .

We deeply value our OrcaSlicer community and appreciate all the social groups that support us. However, it is crucial to address the risk posed by any group that falsely claims to be official or misleads its members. If you encounter such a group or are part of one, please assist by encouraging the group owner to add a clear disclaimer or by alerting its members.

Thank you for your vigilance and support in keeping our community safe!

What's Changed

  • Orca Slicer now support multi-tool printer by @SoftFever in github.com/SoftFever/OrcaSlicer/pull/6087 ↗ — As requested by many, Orca Slicer now supports multi-tool printers! — Users can define multi-tool(tool changer or IDEX) printers in Orca Slicer. — Features supported:
  1. Assign extruders based on features. — Screenshot 2024-09-14 at 11 47 55 AM.
  2. Ooze prevention, both Idle temperature and Temperature variation approach are supported
  3. Preheat next tool automatically based on time estimation. Support all firmwares(Prusa/Klipper/Marlin/etc)
  4. Supports mixing different line widths in a single print with multiple tools. This allows our printer to print with not only different materials/colors, but also control the line width for specific parts, to improve quality, strength, and speed using different nozzles with varying diameters. — For example, we can use one 0.4mm nozzle and one 0.8mm nozzle in one print; the line width will automatically adjust based on a percentage of the nozzle diameter (you will need to define the line width with a percentage in the settings).

image

Note Two new tool changer printer profiles have been added into Orca: Generic ToolChanger based on Klipper and Prusa XL 5T. Multi tool printer need to setup the Custom g-codes properly, please ref to these two profiles if you want to define your own.

github.com/user-attachments/assets/4971061a-b8c4-4b03-a658-04645e74dae2 ↗

image

:heart: Multi tool printer support feature is based on Prusa Slicer's multi tool printer support. Thanks to Prusa team for their open-source work and sharing it with the community!

github.com/user-attachments/assets/6e23baa0-c9ff-424a-a0fb-08e0eb861af0 ↗

This new mode introduces a single-pass flow calibration that should cover 95% of cases, provided the printer's extruder has its e-steps/rotation-distance calibrated. Unlike the previous flow rate calibration, this new YOLO (You Only Look Once) calibration only requires print the test once. Please pay attention that mode employs a linear method to adjust the flow rate. For a -0.03 block, the adjusted flow rate is calculated as filamentflowrate - 0.03. Two versions of the YOLO benchmark are provided: a default (recommended) and a perfectionist version.

The default YOLO benchmark features a calibration range of [-0.05, +0.05] with an adjustment step size of 0.01. In contrast, the perfectionist version offers a smaller adjustment range of [-0.04, 0.035] with an even smaller step size of 0.005.

Detailed tutorial will be updated soon in WIKI

We're excited to introduce another fantastic feature, implemented by @igiannakas, specifically designed for perfectionist users! The "Adaptive Pressure Advance" enhancement in OrcaSlicer now offers an automatic adjustment feature for pressure advance settings based on real-time flow rate and print acceleration. This innovative feature helps improve print quality by compensating for varying extrusion dynamics during different speeds. As a result, it enables smoother transitions and more consistent layer deposition.

The adaptive pressure advance also enhances prints by adjusting the pressure in the nozzle more dynamically, reducing artifacts such as blobs or gaps.

Screenshot 2024-09-13 at 10 58 41 PM image courtesy of @igiannakas

:heart: I'd like to extend our gratitude to the Ultimaker Cura team for their relentless innovation and commitment to sharing their work with the community

Versión oficial ↗