OrcaSlicer
OrcaSlicer 1.8.1
Registro oficial de OrcaSlicer 1.8.1, publicado el 3 dic 2023.
Archivos oficiales de esta versión
Linux · 1 archivos
- OrcaSlicer_Linux_V1.8.1.AppImageNo especificado en el nombre del archivo · 98,3 MiB · 8954 descargasDescarga oficial ↗
macOS · 2 archivos
- OrcaSlicer_Mac_arm64_V1.8.1.dmgARM64 · 113,7 MiB · 10.292 descargasDescarga oficial ↗
- OrcaSlicer_Mac_x86_64_V1.8.1.dmgIntel / AMD 64-bit · 116,7 MiB · 7247 descargasDescarga oficial ↗
Windows · 2 archivos
- OrcaSlicer_Windows_Installer_1.8.1.exeNo especificado en el nombre del archivo · 77,6 MiB · 71.294 descargasDescarga oficial ↗
- OrcaSlicer_Windows_V1.8.1_portable.zipNo especificado en el nombre del archivo · 96,5 MiB · 13.995 descargasDescarga oficial ↗
Cambios de paquetes desde la versión anterior
Frente a 1.8.0, todos los recuentos clasificados siguen iguales con 5 archivos públicos.
Los recuentos son vistas separadas de los nombres del editor por plataforma, procesador y formato. No garantizan compatibilidad ni soporte.
Vista previa de notas
Extracto en texto plano de las notas del editor. Abre la versión oficial para el texto completo y actual.
Las notas del editor se muestran en su idioma original. Este extracto no está traducido automáticamente.
UPDATE:
Apple users: the build is not signed and notarized properly due to a CICD issue. New notarized build will be reuploaded soon. New builds have been uploaded
This is the official release of OrcaSlicer V1.8.1. In this version, we've fixed a few bugs from 1.8.0 to enhance stability. Additionally, we've added a few minor features.
What's Changed
- Introduced thick internal bridges option by @SoftFever in github.com/SoftFever/OrcaSlicer/pull/2954 ↗
Previously, OrcaSlicer would always use thick internal bridges. In this mode, Orca assumes the layer height is equal to the nozzle diameter, which may cause problems when using a large nozzle. Internal thick bridge off: Screenshot 2023-12-02 at 1 18 13 AM Internal thick bridge on: Screenshot 2023-12-02 at 1 17 41 AM
- Internal Bridge Flow rate parameter introduction by @igiannakas
image
- Fix precise wall for Arachne wall generator by @SoftFever in github.com/SoftFever/OrcaSlicer/pull/2966 ↗
For detailed information about the precise wall feature, please refer to the WIKI ↗ image
- Improve arc fitting (#2942) by @SoftFever
- Fixed an issue that purge amount was incorrect when prime tower was not enabled for BBL printers (#2912) by @igiannakas
- Fixed issue that application crashes occasionally when closing application (#2904) by @igiannakas
- Fixed an issue that bed texture was black on AMD GPUs by @Noisyfox #2780
- Fixed an issue that PA calibration Line method was not properly located when bed origin is not at (0,0) by @SoftFever
Printer profiles:
- T500 profile fixes and optimizations (#2848)
- Flashforge: Machine G-code Fix (#2922) by @FlashforgeOfficial
Translation updates:
- Russian translation update (#2873) by @AndylgTom
Support
If you appreciate my work and would like to support me, consider buying me a coffee. Your support is greatly appreciated! :) ko-fi ↗